OEM PN: Type 811 / 801LP
OEM: Levelstate Systems Ltd
Direct Replacement PN: DL811
100% interchangeable / compatible
Summary
Levelstate Systems Type 811 probe is a low-pressure screw fit probe used in the Levelstate Type 501 water column. The Levelstatep DL811 is an ultra high quality 100% completely interchangeable, direct replacement probe. The DL811 is an UPGRADE DIRECT REPLACEMENT for this probe, it uses are PTFE coated brazed zirconia insulator. Drumline manufacture alternate probes that exceed the quality of the OEM part made by Levelstate. This probe is not manufactured by Levelstate Systems.Key Features
Drumline Part Number: DL811Replaces: Levelstate 811 / 801LP
- Max Pressure:150 bar / 2175ps
- Max Temperature:260 Deg C / 500 F
- Construction:PTFE coated Zirconia insulator
- Material:Stainless steel
- Testing: Electrical, helium, hydro
Drumline Levelstep DL811 Probe
Levelstate Systems Type 811
The Drumline Levelststep DL811 probe is 100% interchangeable and compatible with the OEM Levelstate Type 811 probe. These ultra high quality United Kingdom designed and manufactured Levelstatep probes have been supplied for over 10 years.
The Type 811 probe is Levelstate Systems low-pressure water column conductivity probe used in their Type 501 water column. The DL811 is an UPGRADE DIRECT REPLACEMENT for this probe, it uses are PTFE coated brazed zirconia insulator. Drumline manufacture alternate probes that exceed the quality of the OEM part made by Levelstate. This probe is not manufactured by Levelstate Systems.
These probes use a spiral wound stainless steel and graphite gasket for sealing into the water column. Levelstate Water Column Probe (Type 811) The 811 probe is a low-pressure probe designed exclusively for use in the Type 501 water column.
Fixture – M16 x 1.5mm screw thread Seal – Metaflex gasket (stainless steel and grafoil). Temperature Rating – 260 degrees C. Pressure Rating – 150 bar
All Drumline Ltd Levelstep probes are manufactured to the highest standards in the UK using stainless steel to zirconia (or ZTA) vacuum brazing. All materials are carefully selected to minimise The coefficient of thermal expansion (CTE) differences within the materials. This leads to a more reliable brazed joint. All probes have the brazed joints gilded to add an extra degree of protection.
Product Specification
| CHARACTERISTIC | Drumline DL811 |
|---|---|
| Levelstate P/N | Type 811 |
| Body Material | Stainless steel |
| Insulator Material | PTFE coated Brazed Zirconia |
| Maximum Temperature | 260 Deg C / 500 F |
| Maximum Pressure | 150 bar / 2175psi |
| Warranty | 1 Years |
| Country of Origin | United Kingdom |
| Customs Code | 902690 |
Related Products
Probes related to the item above
Levelstate Type 811 / 801LP -
Levelstate Type 801 -
Levelstate Type 802 -
Levelstate Type 803 -
Levelstate Type 851 -
Levelstate Type 852 -
Levelstate Type 862 -
Levelstate Type 871 -
Levelstate Type 872 -
Levelstate Type 882 Probe
Levelstate Type 811 / 801LP Datasheet - Levelstate Type 801 Datasheet - Levelstate Type 802 Datasheet - Levelstate Type 803 Datasheet - Levelstate Type 851 Datasheet - Levelstate Type 852 Datasheet - Levelstate Type 862 Datasheet - Levelstate Type 871 Datasheet - Levelstate Type 872 Datasheet - Levelstate Type 882 Probe Datasheet